Famco Chimney Liner & Rebuild Nationwide

Famco Chimney Liner & Rebuild in Trenton: What to Know First

We provide independent Famco chimney liner and rebuild service throughout Trenton, with most liner replacements and partial rebuilds completed in a single visit after a Level-2 camera inspection. Typical Famco liner jobs run $1,800 to $4,200 depending on flue count and access, and we give you the full price before any work starts. This page is for homeowners with Famco chimney components who need straight answers about what’s failing, what it costs, and who can fix it right the first time. Call (856) 519-0832 - a live person answers, any hour, any day.

Call (856) 519-0832

How Famco Products Fail - and How We Fix Them

• Famco 304 stainless flex liners in multi-flue setups: We’ve pulled these in Trenton’s Chambersburg colonials where the 304 alloy has pinholed at the waterline after 12 to 15 years of freeze-thaw cycling. The 304 grade simply doesn’t hold up to the calcium chloride residue that collects below the damper in oil-to-gas conversions common in Mercer County. We replace with 316Ti or 316L alloy, which handles that chemical soup without the holiday-weekend failure.
• Famco rigid stainless elbows in offset chimney runs: The pressed-seam elbows on older Famco rigid systems work loose at the joint where the flue turns to miss a stairwell or chase wall. In rowhouses near Broad Street Station, we’ve found elbows dropping pitch and collecting condensation that rusts from the inside out. We reseat with proper draw-band torque and add a condensate drain where the geometry allows.
• Famco galvanized connector pipes still in service: These show up in pre-1990 Trenton installs, often hidden above a dropped ceiling in the basement. The galvanized coating chalks and the pipe thins from the outside in, especially where it passes through unconditioned crawl spaces. We document the condition with camera photos, then replace with listed stainless connector and proper clearance to combustibles.
• Famco top-mount dampers integrated with rain caps: The cable-housing seal fails and lets water track down the stainless cable into the flue body. We’ve seen this in Ewing Township splits where the damper frame was never meant to carry the cap load. We can rebuild the seal with OEM parts or convert to a separate Gelco cap and Lyemance damper if the frame is too fatigued.
• Famco clay-to-liner interface in partial rebuilds: When a chimney needs a partial rebuild above the roofline, the new masonry rarely mates clean to an existing Famco liner top. The gap becomes a creosote trap and a draft spoiler. We fabricate a custom stainless top plate with proper overhang and seal it with high-temp silicone rated to 600 degrees - not the generic caulk some crews use that turns to powder in two seasons.

Our Famco Chimney Liner & Rebuild Process

1. 1
   Call and schedule: A live person answers at (856) 519-0832, 24 hours a day. We book a two-hour arrival window and send a confirmation text.
2. 2
   Level-2 camera inspection: Our technician runs a chimney camera from top to bottom and from bottom to top, documenting every joint, every offset, every surface condition. You get the photos and a plain-English verdict before any talk of repair.
3. 3
   Parts decision: If your Famco component can be repaired with OEM parts and still meet code, we say so. If a quality aftermarket solution from DuraFlex, HeatShield, or Gelco serves you better, we explain the trade-off - warranty, longevity, and price - and let you decide. We’re an independent Famco service provider, not a factory rep, so the recommendation is yours to make.
4. 4
   The repair: Background-checked, uniformed technicians complete most Famco liner replacements and partial rebuilds in one visit. We protect floors and furniture, run drop cloths, and haul away old material.
5. 5
   Smoke test and documentation: We pressure-test or smoke-test every liner installation per NFPA 211, then give you written documentation for your insurance or home sale.
6. 6
   The 90-Day Done Right Promise: If anything isn’t right, we come back. In writing, no arguing. That’s the Keystone Standard.

What Famco Chimney Liner & Rebuild Costs in Trenton

These are real 2024-2025 numbers for the Trenton market, not teaser rates. The estimate we give is the invoice you pay. Call (856) 519-0832 for a free, exact quote - no obligation, no sales pitch.

Why Trenton Homeowners Call Hearthstone Chimney Co. for Famco Work

We’ve been answering the phone with a live person for over 42 years, and we plan to be here when your next chimney needs attention. Our technicians know Famco products from hands-on work in Trenton homes - not from a catalog. When a Famco part is back-ordered or discontinued, we have working relationships with DuraFlex, HeatShield, Gelco, and other professional-grade suppliers to keep your job moving. The 90-Day Done Right Promise means if it’s not right, we make it right. In writing, no arguing. Photos you can see, a plain-English verdict. A square deal: no surprises on the bill.

FAQs