Famco Chimney Cap & Crown Nationwide

Famco Chimney Cap & Crown in Trenton: What to Know First

We provide independent Famco chimney cap and crown service in Trenton, with most inspections booked within a few days and repairs completed in a single visit. A standard Famco cap installation runs $280-$520; crown repair or coating typically falls between $340-$780 depending on access and masonry condition. We’re upfront about what you actually need, and we document everything with photos you can see before any work starts.

Call (856) 519-0832

This page is for Trenton homeowners who already have Famco caps or crowns on their chimney, or who are comparing Famco against other brands we work with. If you’re seeing rust streaks, water in the firebox, or mortar crumbling at the crown, we can tell you whether the fix is straightforward or if the cap has been masking deeper damage. Call (856) 519-0832 - a live person answers, 24 hours a day.

How Famco Products Fail - and How We Fix Them

• Famco 13×13 and 13×18 galvanized single-flue caps - the ones we see most on Trenton bungalows and post-war capes - develop rust-through at the corner seams after 8-12 years. The galvanized coating holds up poorly against Mercer County’s freeze-thaw cycles and the salt air that rides in on winter storms from the Delaware. We replace with a Famco-compatible stainless or copper cap, or switch to a Gelco or Copperfield equivalent if the flue size demands it.
• Famco multi-flue caps with mesh sides - common on larger homes near Cadwalader Park - collect creosote in the screen housing because the mesh angle is slightly flatter than competitor designs. The screens clog, airflow drops, and smoke backs up into the house. We pull the cap, assess whether the mesh can be cleaned and reset, or if a replacement with steeper-angled Gelco screening solves it permanently.
• Famco wind-directional caps (the rotating models) - the brass bushing seizes after years of exposure to Trenton’s mixed precipitation. The cap stops rotating, which actually makes draft problems worse than no cap at all. We stock the brass replacement bushings, but often recommend a stationary stainless cap for homeowners who are tired of maintaining a moving part.
• Famco concrete crowns poured too thin by original installers - not a product defect, but a common pairing we find in Chambersburg and Mill Hill rowhouses where the cap was added after-market to a substandard crown. The crown cracks, water gets under the cap flange, and the cap lifts in freeze-thaw. We repair the crown with HeatShield or a poured concrete rebuild, then reset or replace the cap with proper overhang and drip edge.
• Famco band-around-brick mounting on older Trenton masonry - the stainless band tightens against soft, weathered brick and spalls the face over two or three seasons. We see this on 1920s colonials near Hiltonia where the brick is harder on the outside but soft at the core. Our fix: switch to a flue-mount or leg-kit attachment that doesn’t grip the brick, or repoint and install a copper counter-flashing if the brick is too far gone.

Our Famco Chimney Cap & Crown Process

1. 1
   Call and schedule. A live person answers, day or night. We book a Level-2 camera inspection with one of our background-checked, uniformed technicians.
2. 2
   On-site diagnosis. We photograph the cap, crown, and flue interior. Russell Haines or a senior tech gives you a plain-English verdict: what’s wrong, what caused it, and what happens if you wait.
3. 3
   Parts decision. If your Famco model is still in production, we quote OEM. If it’s discontinued - the older galvanized line was phased out around 2016 - we specify a quality aftermarket equivalent from Gelco, Copperfield, or our other professional-grade brands, with the warranty implications explained straight.
4. 4
   The repair. Most Famco cap replacements and crown coatings finish in one visit. We use professional-grade materials, no builder-grade substitutes. Crown work gets proper curing time if temperature allows; if not, we reschedule rather than rush it.
5. 5
   Testing and documentation. We run a draft test, check for leaks with a water hose if conditions permit, and give you photos of the completed work plus your written 90-Day Done Right Promise.
6. 6
   Cleanup and follow-up. We leave the roof and yard as we found them. If something’s not right, you call and we come back. In writing, no arguing.

What Famco Chimney Cap & Crown Costs in Trenton

These are real ranges for Famco work we’ve completed in Trenton and nearby Mercer County homes. Your exact estimate depends on roof access, masonry condition, and whether we find hidden damage once the cap comes off.

We don’t start work until you approve the estimate. The number on the estimate is the number on the invoice. Call (856) 519-0832 for a free, no-pressure inspection and exact quote.

Why Trenton Homeowners Call Hearthstone Chimney Co. for Famco Work

We’ve been serving Trenton and surrounding communities for over 42 years. That’s long enough to see which cap designs last in Mercer County weather and which ones become tomorrow’s service call.

Our technicians carry Famco-compatible parts alongside DuraFlex, HeatShield, Gelco, and Copperfield inventory, so we’re not ordering and hoping. Most jobs finish in one visit. Every repair is backed by our 90-Day Done Right Promise - in writing, no arguing - and every inspection ends with photos you can see and a verdict you can understand.

We’re not a chain, and we’re not a one-truck operator who might answer next week. A live person picks up the phone 24 hours a day. If the chimney’s not right, the fire’s not safe. That’s the whole job.

FAQs